Anvil®
Anvil® 0500360342 FIG 260 ISS Clevis Hanger With Insulation Saddle System, 4 in Pipe, 5/8 in Rod, 550 lb Load, Carbon Steel, Galvanized
Anvil® Clevis Hanger, Series: FIG 260 ISS, 4 in Pipe, 5/8 in Rod, 550 lb, Carbon Steel, Galvanized, 40 to 200 deg F
Documents
- V-Block design cradles pipe through out the entire erection process. Clevis bolt spacer included as standard keeps the clevis lower strap from collapsing.
- Carbon steel with high impact glass reinforced polypropylene saddle and carbon steel pipe space
- V-block design cradles pipe through out the entire erection process
- Clevis bolt spacer included as standard keeps the clevis lower strap from collapsing
- Eliminates of wood blocks and standard shields, costly calcium silicate inserts, re-leveling of piping at each individual hanger after insulation is completed
- Hanger load nut above clevis must be tightened securely to assure proper performance
- Position the pipe on the saddle
- Square cut adjoining insulation and butt the insulation ends to each other
- Insulation joint is coated, caulked and taped following standard insulation practice used on flanges and valves
- Notch insulation to fit around the saddle
- Wood blocks and standard shields
- Costly calcium silicate inserts
- Re-leveling of piping at each individual hanger after insulation is completed
- Anvil insulation saddle system clevises are fully tested and rated for a temperature range from 40 to 200 deg F
- Extensive field-testing and inspection has been performed to confirm that the integrity of the insulation vapor barrier for chilled water systems are sustained with the 260 ISS
- Each insulation joint should be properly coated, caulked and taped
- The Anvil 260 (ISS) Insulation Saddle System reduces your overall installation time and greatly simplifies the way you insulate copper and steel pipe systems
- Contractors can support insulated pipe with less parts and labor
- The revolutionary design of the 260 ISS spreads the load evenly over the lower strap of the clevis
- Standard/Approvals: ASTM E84 Class 1 25/60|UL E94V
Anvil® Clevis Hanger, Series: FIG 260 ISS, 4 in Pipe, 5/8 in Rod, 550 lb, Carbon Steel, Galvanized, 40 to 200 deg F
- Brand: Anvil®Finish: GalvanizedLoad Capacity: 550Material: Carbon SteelPipe Size: 4Rod Size: 5/8Series: FIG 260 ISSTemperature Rating: 40 to 200
Anvil®
Anvil® 0500360342 FIG 260 ISS Clevis Hanger With Insulation Saddle System, 4 in Pipe, 5/8 in Rod, 550 lb Load, Carbon Steel, Galvanized
Anvil® Clevis Hanger, Series: FIG 260 ISS, 4 in Pipe, 5/8 in Rod, 550 lb, Carbon Steel, Galvanized, 40 to 200 deg F